NITRIDE 1/8 is a new generation electronic speed controller for sensored Brushless DC motors. Using Advanced Cooling Technology based on Aluminium NITRIDE Ceramic cooler, NITRIDE 1/8 has excellent thermal conductivity and can be used with powerful motors up to 2800kV.

NITRIDE 1/8 brings revolutionary battery current and discharge real-time monitoring and Innovative Intelligent Algorithms to protect ESC in case of motor failure or mechanical issue.

NITRIDE 1/8 is featured with reverse polarity protection.

NITRIDE 1/8 has TFT matt surface LCD colour display and no other interface is needed. Simple settings adjustment with 3 buttons on display.

Programmable parameters and functions:

• Revolutionary simple Rx calibration.
• Real-time monitoring: battery voltage, ESC and motor temperatures, motor diagnostics, and more.
• Revolutionary battery current and discharge monitoring.
• Pre-race diagnostics: motor temperature, sensor cable, bad motor, battery, BEC voltage, and more.
• Easy programming: throttle, brake, boost and turbo timing, Hall angle, and many other functions.
• Race data logging, temperature and other curves, histograms, and more. Data is saved after the ESC is turned off.
• Adjustable maintenance reminder for easy checking.
• No programming interface required.
• Firmware update function.

Key Features:

• TFT LCD colour display, matte finish - LCD colour display with a resolution of 160 × 80 pixels allows you to set all the parameters and check all the data directly on your ESC, without the need for a programming card or a mobile application. Everything you need is inside your ESC. It is really easy to use - 3 buttons allow you to quickly set everything you need and a single view is enough to check all the parameters necessary for the race. Simple. Fast. Accurate.
• Easy Check and Set - The display gives you an overview of all the important data and events before the race, during the race and after the race. You can change your settings quickly and get instant feedback, without the delay of connecting an external control interface.
• Advanced Cooling Technology - NITRIDE features Advanced Cooling Technology based on an Aluminium NITRIDE heatsink, specially developed for NITRIDE, giving the ESC excellent thermal conductivity and long-term resistance to high temperatures and loads. MOSFET transistors are cooled directly without any additional thermal resistance layer. During production, ELCERAM uses very thick layers of special materials such as silver and copper for very low internal resistance, together with the latest technologies inspired by advanced power systems designed and manufactured by ELCERAM.
• For even better cooling, NITRIDE 1/8 features additional aluminium cooling fins. If needed in special conditions, NITRIDE 1/8 is equipped with pre-drilled mounting holes for fan installation and a connector for a 25mm Intelligent Fan.
• Reverse polarity protection.
• Intelligent algorithms for ESC protection.
• Easy installation - Installation of the NITRIDE 1/8 is quick and easy. It can be attached to the chassis using the included double-sided tape or screwed directly onto a suitable location, ideally with good thermal conductivity.
• In addition, the ESC cover with the display and buttons can be easily replaced in the event of accidental damage.

Specifications:

Package Contents:

• NITRIDE 1/8 ESC
• AWG10 Wires
• 2 × External Capacitors
• 25mm ELCERAM Fan
• Double-Sided Tapes
• ELCERAM Stickers